Electret Condenser Microphone Element.
Internal FET amplifier. Omnidirectional pickup.
300 Hz-18 KHz frequency response.
Requires 2-10 Volts DC for operation.
Size: 5/16" x 3/8" diameter.
Solder pad connections.
(Stock #: MK07)
Electret Condenser Microphone Element.
Internal FET amplifier. Omnidirectional pickup.
100 Hz-10 KHz frequency response.
Requires 2-10 Volts DC for operation.
Size: 3/16" x 25/64" diameter.
With wire leads.
(Stock #: MK01)
Unpowered Electret Condenser Microphone.
Small Mono Electret Condenser Microphone works
with audio equipment that supplies Phantom Power
for an external Electret Condenser Microphone.
Operates on 2-10 Volts DC.
Omni-directional pickup pattern.
100 Hz-10 KHz frequency response.
Size approx.: 7/8" x 3/8" diameter.
4 foot long cord with 1/8" mono plug.
Includes clothing/tie clip.
(Stock #: MK03P)
Apple Computer Microphone.
Original 1991 Apple Electret Condenser Microphone.
Omni-directional pickup pattern.
100 Hz-10 KHz frequency response.
Size: 1 1/2" diameter x 1/2" thick.
6 foot long cord with 1/8" stereo plug.
Includes self-stick holder.
Apple Part Number: 699-5103A.
(Stock #: APPLEMIC)
Telephone Pick-Up Coil.
Magnetic induction type microphone is designed
to be attached near the earpiece of a standard
telephone handset using a built-in suction cup.
Will pickup both sides of a telephone conversation.
Useful for telephone recording or amplification.
Use with almost any tape recorder that has an
external 1/8" microphone jack. 3 foot long cord
with 1/8" mono plug.
Note: May not be compatible with
some electronic telephone handsets.
(Stock #: MK05)
Electret Condenser Microphones. (Assortment) (RFE)
Perfect for replacement or experimental use.
Set of 6 pieces.
(Stock #: MK04)
-Click Here To Return To Parts Index-
-Click Here To Return To Main Page-