Data Sheet - PDF File size: 40K
20 Position Key Switch Pad - No Key Caps.
20 Position 4x5 wired matrix. Terminates into an 10 pin
male header connector. Mechanical key switches have
a full travel of 1/8". Key switch contacts are conductive
elastometric type with a rating of 5 Ma. at 12VDC,
circuit resistance is under 250 ohms. Key board area
is 3" x 3 3/4". Glass epoxy PCB has 4 mounting holes.
PCB Size: 4 1/4" L. x 3 3/4" W. x 9/16" H.
Key switches use standard "Cherry Type"
cruciform 3/4" sq. key caps.
With wiring diagram.
(Stock #: WNKS14)
Insertable Legend Key Cap.
Two piece design features a removable, reusable clear plastic top.
Simply insert any 7/16" x 7/16" printed design between cap
and cap top for use as a key legend. Clear plastic top
protects the legend against wear.
For use with the above keypad or pushbutton switches
or any other keypads or switches that use standard
"Cherry Type" 3/4" sq. cruciform caps.
Cap size: 0.725" sq. x 0.315".
Cruciform size: 0.160" x 0.150" deep.
(Stock #: WNKC11)
Blue Key Cap.
For use with the above keypad or pushbutton
switches or any other keypads or switches that use
standard "Cherry Type" 3/4" sq. cruciform caps.
Cap size: 0.725" sq. x 0.310".
Cruciform size: 0.160" x 0.200" deep.
(Stock #: WNKC06)
Red Key Cap.
For use with the above keypad or pushbutton
switches or any other keypads or switches that use
standard "Cherry Type" 3/4" sq. cruciform caps.
Cap size: 0.725" sq. x 0.310".
Cruciform size: 0.160" x 0.200" deep.
(Stock #: WNKC08)
White Key Cap.
For use with the above keypad or pushbutton
switches or any other keypads or switches that use
standard "Cherry Type" 3/4" sq. cruciform caps.
Cap size: 0.725" sq. x 0.310".
Cruciform size: 0.160" x 0.200" deep.
(Stock #: WNKC15)
Yellow Key Cap.
For use with the above keypad or pushbutton
switches or any other keypads or switches that use
standard "Cherry Type" 3/4" sq. cruciform caps.
Cap size: 0.725" sq. x 0.310".
Cruciform size: 0.160" x 0.200" deep.
(Stock #: WNKC09)
Beige Key Cap.
Heavy-duty beveled top design. For use with the above
keypad or pushbutton switches or any other keypads
or switches that use standard "Cherry Type"
3/4" sq. cruciform caps.
Cap size: 0.715" sq. x 0.315".
Cruciform size: 0.160" x 0.150" deep.
(Stock #: WNKC10)
Blue Double-Width Key Cap.
For use with pushbutton switches or any other
keypads or switches that use standard "Cherry Type"
cruciform caps.
Cap size: 1.5" x 0.725" x 0.315".
Cruciform size: 0.160" x 0.200" deep.
Cruciform center to center spacing: 0.470"
(Stock #: WNKCD01)
Gray Double-Width Key Cap.
For use with pushbutton switches or any other
keypads or switches that use standard "Cherry Type"
cruciform caps.
Cap size: 1.5" x 0.725" x 0.315".
Cruciform size: 0.160" x 0.200" deep.
Cruciform center to center spacing: 0.470"
(Stock #: WNKCD02)
Red Double-Width Key Cap.
For use with pushbutton switches or any other
keypads or switches that use standard "Cherry Type"
cruciform caps.
Cap size: 1.5" x 0.725" x 0.315".
Cruciform size: 0.160" x 0.200" deep.
Cruciform center to center spacing: 0.470"
(Stock #: WNKCD03)
Beige Double-Width Key Cap.
Heavy-duty beveled top design. For use with pushbutton
switches or any other keypads or switches that use
standard "Cherry Type" cruciform caps.
Cap size: 1.5" x 0.725" x 0.315".
Cruciform size: 0.160" x 0.200" deep.
Cruciform center to center spacing: 0.470"
(Stock #: WNKCD04)
Data Sheet - PDF File size: 906K
16 Position Membrane Keypad Kit.
Self-stick, 16 Position 4x4 matrixed. Sealed design makes
keypad fully dust-resistant and water-resistant. Keypad
also features audible-tactile contacts, circuit resistance
of 150 ohms or less, and up to 1,000,000 operations
service life. Switch contacts are rated at 15 Ma. at 5VDC.
Keypad Kit includes 16 Position adhesive-backed Membrane,
black mylar Overlay with 16 transparent windows,
adhesive-backed black Bezel, 8-position connector,
16 adhesive-backed White Color Pads, and
8 adhesive-backed Red Color Pads.
Size: 4" square x 1/8". With Instructions.
DMC part number: DTK-16/DT-16/DS-16.
(Stock #: WNKS25)
Data Sheet - PDF File size: 422K
16 Position Shielded Immersion-Proof Keypad - Raised Keys.
16 Position 4x4 matrixed. Sealed silicone rubber design makes
keypad fully dust-resistant and water-resistant. Shielded design
results in up to 95 dB RFI/EMF rejection. Keypad also features
audible-tactile contacts, circuit resistance of 10 ohms or less,
and up to 3,000,000 operations service life. Switch contacts
are rated at 10 Ma. at 24VDC. Back of keypad has six 9/32"
long 6-32 mounting studs.
Size (less mounting studs): 3 1/8" square x 1/2".
With removable keytops, spec sheet, and mounting hardware.
Grayhill part number: 84S-BB1-006 similar to 84S-BB2-001.
(Stock #: WNKS23)
Data Sheet - PDF File size: 157K
36 Position Immersion-Proof Keypad.
36 Position matrixed. Sealed design makes keypad fully
dust-resistant and water-resistant. Keypad meets Class IP67
protection. Keypad also features a 2 million operations
service life. Switch contacts are rated at 50 Ma. at up to
24VDC. Key travel is 1.5 mm. Operation force is 160 grams.
Back of keypad has 14-pin male header connector and six
1/2" long 5-40 panel mounting studs.
Size: 3 3/4" L. x 8 1/2" W. x 3/4" H.
Includes 80 removable (A-Z, 0-9, & Function) keytop legends.
With spec sheet, wiring diagram, and mounting hardware.
Storm part number: 70360103.
(Stock #: WNKS20)
-Click Here To Return To Parts Index-
-Click Here To Return To Main Page-