Line-1 Business Telephone Tap.
Unit allows the connection of single line devices to line 1
of a 1A2-type multi-line business phone system.
(Stock #: TEL01)
Telephone Line Restrictor.
Unit prevents an extension phone from picking up a line and
interrupting a telephone call, modem or Fax connecton. For
use with single or 2-line systems. Caller ID compatible.
Operates on a 9V battery. With instructions.
This unit is NEW in factory package. Original cost $13.
DSL Filter.
DSL Filter filters out unwanted interference when using a
telephone, telephone answerer, or other telephone device
on a DSL data line. Two jacks split the DSL line to allow
the use of a telephone device and a DSL modem on a
single telephone jack.
(Stock #: DSLFILT)
Telephone Pick-Up Coil.
Magnetic induction type microphone is designed
to be attached near the earpiece of a standard
telephone handset using a built-in suction cup.
Will pickup both sides of a telephone conversation.
Useful for telephone recording or amplification.
Use with almost any tape recorder that has an
external 1/8" microphone jack. 3 foot long cord
with 1/8" mono plug.
Note: May not be compatible with
some electronic telephone handsets.
(Stock #: MK05)
Micro Cassette Recording Tape.
Good quality polyester base tape.
C60 leaderless. 30 minutes per side.
Also can be used with micro cassette
telephone answerers as an incoming tape.
With storage case.
(Stock #: AUD01)
Modular Telephone Handset Connector.
4 pin crimp-type male handset connector.
For use with cable between telephone
handset and base.
(Stock #: TEL08)
Modular Telephone Connector.
Standard 4 pin crimp-type male
RJ-11/RJ-14 connector.
Supports 1 or 2 lines.
(Stock #: TEL47)
Telephone Modular Connector Crimping Tool.
Tool crimps 2-pin or 4-pin RJ-11 modular telephone
base connectors or 6 pin RJ-12 modular telephone base
connectors. Tool also features built-in modular telephone
wire cutter and stripper.
(Stock #: TELTOOL1)
1 To 2 Jack Duplex "T" Adapter.
Connects 2 devices to 1 phone jack.
4-wire RJ-11/RJ-14.
Supports 1 or 2 lines.
(Stock #: TEL04)
3 Jack Duplex Adapter.
Attach to a standard modular telephone cable
to connect 2 devices to 1 phone jack.
4-wire RJ-11/RJ-14.
Supports 1 or 2 lines.
(Stock #: TEL51)
Two-Line Telephone Splitter.
Three-way splitter splits a RJ-14 two-line modular jack into
seperate RJ-11 Line-1 & Line-2 modular jacks and an additional
RJ-14 two-line modular jack. Allows the connection of 2 RJ-11
single-line telephone devices and an additional two-line device
to either of the two telephone lines.
(Stock #: TEL44)
Modular Telephone To 4-Pin Adapter.
Adapter allows the use of standard modular telephone
male plugs with the older 4-Pin telephone jacks that
were once used throughout the United States.
Very hard to find.
(Stock #: TEL55)
United Kingdom Telephone Jack Adapter.
Allows the use of 2/4-wire RJ-11 modular plug type
US telephones, fax machines, and computer modems
with UK telephone jacks.
(Stock #: TEL30)
German Telephone Jack Adapter.
Allows the use of 2/4-wire RJ-11 modular plug type
US telephones, fax machines, and computer modems
with German telephone jacks.
(Stock #: TEL29)
Surface-Mount Telephone Jack.
Screw-connection 4-wire RJ-11 jack.
Supports 1 or 2 lines. Ivory color.
With mounting hardware.
(Stock #: WNTEL01)
RJ-11 Round Female Wall Plate.
Screw-connection 4-wire RJ-11 jack.
Mounts into any wall using included metal
mounting ring. Supports 1 or 2 lines.
With mounting hardware.
(Stock #: TEL41)
RJ-11 Female Wall Plate.
Screw-connection 4-wire RJ-11 jack.
Mounts onto a standard electrical box.
Supports 1 or 2 lines. Ivory color.
With mounting hardware.
(Stock #: TEL10)
RJ-11/RJ-25 Female Wall Plate.
Screw-connection 6-wire RJ-11/RJ-25 jack.
Mounts onto a standard electrical box.
Supports 1, 2, or 3 lines. Ivory color.
With mounting hardware.
(Stock #: TEL11)
RJ-11 Dual Female Wall Plate.
Dual screw-connection 4-wire RJ-11 jack.
Mounts onto a standard electrical box.
Supports 1 or 2 lines. Ivory color.
With mounting hardware.
(Stock #: TEL12)
Telephone Wall Jack Plate.
Screw-connection 4-wire RJ-11 jack.
Telephone slide-mounts onto front 2 screws.
Mounts onto a standard electrical box.
Supports 1 or 2 lines. With mounting hardware.
(Stock #: TEL03)
3-Jack Telephone Wall Jack Plate.
Wall Jack Plate features 3 jacks, one jack on
the front and one jack on each side of the plate.
Allows the connection of a telephone and two
additional devices such as a FAX machine,
telephone answerer, caller ID box, or modem.
Screw-connection 4-wire RJ-11 jack.
Telephone slide-mounts onto front 2 screws.
Mounts onto a standard electrical box.
Supports 1 or 2 lines. With mounting hardware.
(Stock #: TEL32)
3-Jack Telephone Wall Jack Plate.
Wall Jack Plate features 3 jacks, one jack on
the front and one jack on each side of the plate.
Allows the connection of a telephone and two
additional devices such as a FAX machine,
telephone answerer, caller ID box, or modem.
Screw-connection 6-wire RJ-11/RJ-25 jack.
Telephone slide-mounts onto front 2 screws.
Mounts onto a standard electrical box.
Supports 1, 2, or 3 lines. With mounting hardware.
(Stock #: TEL42)
Modular Telephone Wire Junction Block.
Screw-Terminal 4-Wire Junction Block provides an
easy way to add additional telephone devices to a
demarkation block or existing modular jack.
Features a 12" long modular RJ-11 connecting cable.
Perfect for use with alarm panels or other devices
that require hard wiring to the telephone interface.
With cover and mounting hardware.
(Stock #: TEL54)
Retractable Telephone Cord.
8 foot ultra-thin telephone cord contains a RJ-11 modular
plug on each end, neatly retracts into the wind-up reel of
the pocket-size case for easy storage.
Perfect for use with laptop computers.
Size: 3 3/8" x 2 1/4" x 7/16".
(Stock #: TEL16)
25' Modular Telephone Extension Cord.
Four conductor 25 foot extension cord has a
modular plug on one end and a RJ-11 jack on
the other end. Supports 1 or 2 lines. Ivory color.
(Stock #: TEL06)
Wall Telephone Cable.
6 inch long four conductor cable with a modular plug
on each end is perfect for connecting a wall telephone
to a wall plate. For single or 2-line use.
Color may vary.
(Stock #: TEL28)
6' Flat Telephone Cable.
Standard replacement two conductor
6 foot cable with modular plugs.
For single line use.
Color may vary.
(Stock #: TEL27)
6' Flat Telephone Cable.
Standard replacement four conductor
6 foot cable with modular plugs.
For single or 2-line use.
Color may vary.
(Stock #: TEL40)
25' Flat Telephone Cable.
Standard replacement two conductor
25 foot cable with modular plugs.
For single line use.
Color may vary.
(Stock #: TEL09)
25' Flat Telephone Cable.
Standard replacement four conductor
25 foot cable with modular plugs.
For single or 2-line use.
Color may vary.
(Stock #: TEL49)
25' Ultra Thin Telephone Cable.
Ultra thin flat four conductor cable is only 1/32" thick.
25 foot cable with a modular plug on each end.
Easy to conceal and very flexible. Ideal for running
along a wall baseboard or under carpeting.
For single or 2-line use.
(Stock #: TEL45)
50' Ultra Thin Telephone Cable.
Ultra thin flat four conductor cable is only 1/32" thick.
50 foot cable with a modular plug on each end.
Easy to conceal and very flexible. Ideal for running
along a wall baseboard or under carpeting.
For single or 2-line use.
(Stock #: TEL46)
50' Six Conductor Telephone Cable.
Heavy-duty 50 foot flat cable with RJ-25 modular plugs.
For 1, 2, or 3 line use.
(Stock #: TEL57)
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
Heavy-Duty Coiled Telephone Handset Cord.
Connects between telephone base and handset
using modular handset plugs.
25' Flat Telephone Cable.
Four conductor 25 foot flat cable with bare ends.
For use with modular plugs. Perfect for repair or
replacement use. Supports 1 or 2 lines.
Ivory color.
(Stock #: TEL07)
50' Flat Telephone Cable.
Four conductor 50 foot flat cable with bare ends.
For use with modular plugs. Perfect for repair or
replacement use. Supports 1 or 2 lines.
Ivory color.
(Stock #: TEL23)
Telephone Wiring Kit.
Kit includes 50 feet of heavy-duty, six conductor
Category 3 telephone cable, 6-pin RJ11/RJ14/RJ25
surface-mount modular telephone jack, 10 wire clips,
wire stripper tool, double-sided tape, and mounting
screws. Supports 1, 2, or 3 lines. With instructions.
(Stock #: TEL52)
12' 8-Conductor Straight Modular Telephone Cord.
Eight conductor 12 foot cord has a RJ45 modular
plug on each end. Straight-through wiring configuration.
Used in many business telephone systems, voice-terminal
telephones, and dumb computer terminals.
(Stock #: TEL21)
25' RJ45 Male To Female Extension Cable.
Straight-through wiring. Can also be used
with many ISDN/digital phone systems.
UL Listed.
(Stock #: CMPCAB15)
6' 8-Conductor Crossed Modular Telephone Cord.
Eight conductor 6 foot cord has a RJ45 modular
plug on each end. Crossed wiring configuration.
Used in many business telephone systems, voice-terminal
telephones, and dumb computer terminals.
(Stock #: WNTEL02)
25' 8-Conductor Crossed Modular Telephone Cord.
Eight conductor 25 foot cord has a RJ45 modular
plug on each end. Crossed wiring configuration.
Used in many business telephone systems, voice-terminal
telephones, and dumb computer terminals.
(Stock #: TEL22)
100' Flat 8-Conductor Telephone Cable.
Eight conductor 100 foot flat cable with bare ends.
For use with RJ45 modular plugs.
28-gauge stranded conductors.
Gray color.
(Stock #: TEL48)
Telephone / Data Wire Tool.
Pocket-size 3 3/4" long tool strips and inserts
Category 5 UTP/STP wires into type 110 IDC
jacks. Will remove 3mm to 7mm of cable jacket
and will press wires into keystone 110 IDC jacks.
Also will strip small diameter shielded audio and
RF coaxial cables. With instructions.
(Stock #: TDTOOL)
-Click Here To Return To Parts Index-
-Click Here To Return To Main Page-