Test Probe Set.
4 1/2" long probes with standard banana plugs.
Replaces the probes used in most multimeters and DVMs.
36" long. Rated at 1200V AC/DC max.
Set of red & black.
(Stock #: TESTCB01)
Test Probe Set.
4" long probes with shrouded banana plugs.
Replaces the probes used in most multimeters
and DVMs that use shrouded banana plugs.
36" long. Rated at 1200V AC/DC max.
Set of red & black.
(Stock #: TESTCB04)
Test Probe Set.
4 1/2" long probes with pin-tip plugs.
Replaces the probes used in most multimeters
and DVMs that use pin-tip plugs. 47" long.
Set of red & black.
(Stock #: TESTCB05)
Mini-Hook Test Clip Banana Jack Adapters.
2 3/4" long plunger clips features a spring-loaded
retracting hook. Grabs leads up to 1/16" in diameter.
4 1/2" long adapter features a standard banana jack
at the end. Set of red & black.
(Stock #: TESTCB12)
Mini-Hook Test Clip Banana Jack Adapters.
2 3/4" long plunger clips features a spring-loaded
retracting hook. Grabs leads up to 1/16" in diameter.
12" long adapter features a standard banana jack
at the end. Set of red & black.
(Stock #: TESTCB13)
Mini-Hook Test Clip Adapters.
2 1/2" long plunger clip features a spring-loaded
retracting hook. Grabs leads up to 1/16" in diameter.
Fits over standard pin-tip test probes.
Set of red & black.
(Stock #: TESTCB10)
Test Probe Plunger Clip Adapter Set.
2 1/2" long plunger clip adapter features a spring-loaded
retracting hook. Grabs leads up to 0.07" in diameter.
Rear of adapter screws on to a threaded test probe.
Set of red & black.
(Stock #: WNCONN30)
Plunger Clip.
5" long plunger clip features a spring-loaded
retracting hook. Grabs leads up to 0.06" in diameter.
Rear solder terminal wire connection.
Red color.
(Stock #: WNCONN28)
Data Sheet - PDF File size: 25K
Miniature Banana Jack.
For use with 0.12" diameter miniature
banana plugs. Panel mount.
Fits into a 11/64" hole.
Blue color.
ITT Pomona part number: 4022-6 / 2142-6.
(Stock #: WNCONN18)
Data Sheet - PDF File size: 25K
Miniature Banana Jack.
For use with 0.12" diameter miniature
banana plugs. Panel mount.
Fits into a 11/64" hole.
Gray color.
ITT Pomona part number: 2142-8.
(Stock #: WNCONN19)
Data Sheet - PDF File size: 25K
Miniature Banana Jack.
For use with 0.12" diameter miniature
banana plugs. Panel mount.
Fits into a 11/64" hole.
Orange color.
ITT Pomona part number: 2142-3.
(Stock #: WNCONN20)
Data Sheet - PDF File size: 25K
Miniature Banana Jack.
For use with 0.12" diameter miniature
banana plugs. Panel mount.
Fits into a 11/64" hole.
Violet color.
ITT Pomona part number: 2142-7.
(Stock #: WNCONN21)
Data Sheet - PDF File size: 25K
Miniature Banana Jack.
For use with 0.12" diameter miniature
banana plugs. Panel mount.
Fits into a 11/64" hole.
White color.
ITT Pomona part number: 2142-9.
(Stock #: WNCONN22)
Data Sheet - PDF File size: 25K
Miniature Banana Jack.
For use with 0.12" diameter miniature
banana plugs. Panel mount.
Fits into a 11/64" hole.
Yellow color.
ITT Pomona part number: 2142-4.
(Stock #: WNCONN23)
Data Sheet - PDF File size: 23K
Miniature Banana Plug Patch Cord.
Patch Cord assembly consists of a 2-way stackable
0.12" diameter miniature banana plug on each end.
Cable is 18" long. Black color.
ITT Pomona part number: 1081-18-0.
(Stock #: WNCAB06)
Stackable Banana Plug Set.
Standard-size 0.17" diameter banana plugs.
Solder type. Accepts 16-22 AWG size wires.
Rear of plug accepts another banana plug.
Set of red & black.
(Stock #: TESTCB11)
Shorting Banana Plug Binding Post.
Standard-size 0.17" diameter banana plugs/jack.
ITT Pomona part number: 4665-0.
(Stock #: WNCONN10)
Pin Tip Plug.
Standard-size 0.075" diameter pin tip.
Solder type. Accepts 18-22 AWG size wires.
HH Smith part number: 235-102.
Red color.
(Stock #: WNCONN26)
3M 20-Pin Test IC Clip.
For testing 8-20 pin standard spacing DIP ICs.
3M part number: 923690-20.
(Stock #: TESTCB03)
24 Pin DIP IC Jumper Test Cable.
Cable assembly consists of two 24 Pin
DIP test clips for use with 0.6" IC spacing.
Color-coded cable is 3 feet long.
(Stock #: MSCAB03)