Click on a picture for a larger view.
Wait a few seconds.
Another browser window will open.
Close that window when done.
Economy Soldering Iron.
30 Watt 110 VAC soldering iron is perfect for PCB
work and general wiring. Features a replaceable
tip and a 3 1/2 foot power cord.
This item is NEW in factory package.
Radio Shack Replacement 15 Watt Soldering Iron Tip.
0.7" long. Copper-Nickel plating.
For use with Radio Shack soldering iron model:
64-2051.
Radio Shack part number: 64-2052.
This item is NEW.
Radio Shack Replacement 25 Watt Soldering Iron Tip.
1.2" long. Copper-Nickel plating.
For use with Radio Shack soldering iron model:
64-2070.
Radio Shack part number: 64-2073.
This item is NEW.
Radio Shack Replacement 30 Watt Soldering Iron Tip.
1.36" long. Copper-Nickel plating.
For use with Radio Shack soldering iron models:
64-2055/64-2066/64-2067/64-2105.
Radio Shack part number: 64-2065.
This item is NEW.
Radio Shack Replacement 40 Watt Soldering Iron Tip.
1.125" long. Copper-Nickel plating.
For use with Radio Shack soldering iron model:
64-2071.
Radio Shack part number: 64-2072.
This item is NEW.
Weller Replacement Soldering Iron Tip.
3/16" screwdriver tip. 700 degree F.
For use with Weller soldering iron models:
W60P/W60P3.
For use with Weller Soldering Gun models D440/8200.
For use with Radio Shack Soldering Gun model 64-2190.
This item is NEW.
Jumbo Solder Sucker.
13" long Spring-loaded Plunger-type De-soldering pump
features a high temperature-resistant Flourocarbon tip which
will not damage or scratch PC boards. Creates a very powerful
vacuum suction to easily remove molten solder.
This item is NEW in factory package.
Ungar TO-5 Transistor/IC Extractor.
For rapid removal of TO-5 case Transistors and ICs.
Spring-loaded clip attaches to the case body of the
transistor or IC, when the solder of all the pins has
become molten, the transistor or IC will be completely
lifted out of the PCB holes. For use with de-soldering
cups and systems. With instructions.
This item is NEW in factory package.
Solder - Handy-Pack.
Handy-Pack Tube of 0.062" diameter
Rosin-Core 60/40 Tin/Lead solder.
Standard formula for general electronics work.
Perfect for storing a little solder in your desk
drawer or car glove box. 0.5 Ounces.
Soon, this type of solder is going to
be very hard to find, if not impossible.
None of the current lead-free solders
are equal to standard Tin/Lead solders
in terms of wetting, flow, and longevity.
This product can only be shipped within the United States.
This product is NOT for sale outside the United States.
This item is NEW.
Solder Strips.
Low-Heat Solder Strips melt with the heat
of a match or cigarette lighter. Just wrap a
solder strip around twisted wires and heat.
Perfect for emergency repairs.
Each Solder Strip measures 3/4" x 1/8".
Package of 100 strips.
Soon, this type of solder is going to
be very hard to find, if not impossible.
None of the current lead-free solders
are equal to standard Tin/Lead solders
in terms of wetting, flow, and longevity.
This product can only be shipped within the United States.
This product is NOT for sale outside the United States.
This item is NEW.
Soldering Iron Anti-Seize Paste.
High temperature Anti-Seize Paste reduces soldering
iron tip thread seizure. Reduces thread oxidation and
increases tip life. 1/2 Ounce tube.
This item is NEW.
Mini Glue Gun.
Ideal for quick repairs, model building,
wood crafts, and more. Trigger-feed.
Uses standard 5/16" mini glue sticks.
Includes 2 glue sticks. UL listed.
115 VAC operated.
This unit is NEW in factory package.
Talking Tire Pressure Gauge.
Pocket-size gauge features automatic voice readout of
tire pressure in English or Spanish and also displays
the pressure on a large easy-to-read LCD display.
Pressure Range: 5-99 PSI. Unit operates on 1 CR2032 battery.
Size: 6 1/2" x 1 1/2" x 5/8". With battery and instructions.
Perfect for checking tire pressure on cars, trucks, and bicycles,
and even for pressure checks on basketballs and footballs.
Also useful for checking air compressor pressure levels.
This item is NEW in factory package.
Anti-Static Wrist Strap.
Adjustable Anti-Static Wrist Strap features conductive
rubber construction, velcro closure, 24" cable with an
alligator clip at the end, and a built-in 1 MegOhm resistor.
Simply attach the strap around the wrist and connect the
alligator clip to a grounded work surface.
This item is NEW.
Wire Wrap Tool.
4 1/2" long Wire Wrap / UnWrap Tool features all metal
construction and includes a wire stripper which stores
inside the handle. Tool provides a modified wrap when
used with 30 gauge Kynar wrapping wire.
With instructions.
This item is NEW.
TV Alignment Tool Set.
Set of 2 alignment tools fit most
IF and RF transformer slugs.
Also useful for adjusting trimmer
potentiometers and capacitors.
This item is NEW.
Insulated Tweezers.
Good quality tweezers are 5" long with serrated jaws and
1/16" wide tips. Perfect for all electronics applications
and when working on "live" wires.
This item is NEW.
D-Subminiature Pin Insertion / Extraction Tool.
Tool inserts and extracts crimp-style D-subminiature
connector pins. Red-end of tool inserts pins and
White-end of tool extracts pins. With instructions.
This item is NEW.
Telephone / Data Wire Tool.
Pocket-size 3 3/4" long tool strips and inserts
Category 5 UTP/STP wires into type 110 IDC
jacks. Will remove 3mm to 7mm of cable jacket
and will press wires into keystone 110 IDC jacks.
Also will strip small diameter shielded audio and
RF coaxial cables. With instructions.
This item is NEW.
DIP IC Insertion / Extraction Tool Set.
5-piece tool set features an insertion handle,
3 IC guide frames, and a metal IC extractor
tool. Inserts and extracts 0.3" and 0.6" wide
DIP ICs with 6-40 pins. Insertion handle also
features a screw-connection for anti-static
grounding. With instructions.
This item is NEW.
PLCC IC Extraction Tool.
Spring-loaded Extraction Tool safely removes
18 to 124 pin PLCC ICs from sockets. Features
ESD handles for use on static-sensitive components.
This item is NEW.
F-Connector Tool.
Use to install F-type screw-on and crimp connectors.
Also features a built-in cable stripping gauge.
With instructions.
This item is NEW.
6" Slip-Joint Pliers.
Well made tool features cushion-grip handles.
Chrome-vanadium steel construction.
Dropforged and heat-treated for strength.
This item is NEW.
6" Adjustable Wrench.
Well made tool features cushion-grip handles.
Chrome-vanadium steel construction.
Dropforged and heat-treated for strength.
Precision-machined jaws open to 3/4".
This item is NEW.
Nibbling Tool.
Very well made tool cuts soft steel, aluminum, copper, and
plastics. Tool features steel construction for long life and
long handles with finger guards for ease of use.
Cuts up to 18-gauge soft-steel, and up to 1/16" aluminum,
copper, plastics, or other unhardened material.
This item is NEW in factory package.
Mini Aluminum Flashlight.
Well made adjustable beam flashlight
operates on 1 AAA battery. 3 3/4" long.
Includes keyring.
This item is NEW.
Acid Brushes.
Industrial cleaning brushes with horse hair bristles
and 7 inch long tin-plated steel handles.
1/4" brush width. Package of 6 brushes.
This item is NEW.
VCR Head Cleaning Swabs.
Plastic swab with 45 degree angled cleaning end.
Tip is covered with super soft Chamois material.
4 1/2" long. Package of 5 brushes.
This item is NEW.
Measuring / Mixing Cups.
Heavy duty crack-resistant plastic
cup is marked from 5 to 50 ML.
Can be cleaned and reused 100's
of times. Package of 6 cups.
This item is NEW.
Aluminum Weighing Dishes.
Weighing Dish is 2 1/2" in diameter x 9/16" high.
Dish has a capacity of 30 ml / 30 cc.
Features a finger tab for easy handling.
Can be cleaned and reused 100's of times.
Perfect for weighing liquids or powders.
Also makes a handy Epoxy mixing dish.
Package of 12 dishes.
This item is NEW.
8 Ounce Plastic Bottle.
Very well made clear plastic bottle is made
of PVC material and holds 8 ounces. Size
is 6 3/4" tall x 1 3/4" diameter with a 9/16"
ID mouth. Bottle features sloped shoulders
and a black screw cap with knurled sides.
Perfect for storing solids or liquids such
as printer toner or ink.
This item is NEW.
Connector Contact Cleaner Pen.
Cleans and leaves a protective coating
on the surface of any audio/video/power
connector. Use just like a marking pen.
Contains enough solution to clean and
protect hundreds of connectors. Perfect
for audio and video cables. Also can be
used on video game cartridges. Pen is
5 1/2" long and easily fits into a shirt
pocket. 0.3 Fl. Oz.
-Click here for Electronic Hardware-
-Click Here To Return To Main Page-