SMC Electronics is proud to announce a new line of
High-Quality, Portable Electronic Rack Cabinets.
Made in the USA by Us!
High-Quality Construction, Fully Carpeted,
Will Last A Lifetime.
Click below for additional pictures:
4U Height Portable Electronic 19" Rack Cabinet.
4U Height Portable Electronic Rack Cabinet is perfect for
19" rack-mount
equipment such as radio tuners, transistorized amplifiers, equalizers,
mixers, signal processors, test equipment, or almost any other piece
of electronic equipment.
Carpet-Covered Rack Cabinet will protect the equipment while providing easy transport and a professional appearance. Also
attractive enough for permanent display on any shelf, table or
workbench.
Front of Rack Cabinet includes a removeable 4U height,
Black Powder-Coated Steel Panel.
Rear of Cabinet includes a 2U height, Black Powder-Coated Mesh Punched-Hole Steel Panel with Exhaust Fan and a
2U height, Black Powder-Coated Steel panel.
Rear panels are easily machined to add cutouts for cables,
connectors, outlets, switches, or other needs.
Other Features include:
Fully Carpeted, 15mm Wood Cabinet.
Plastic Guards on all corners.
Bottom-mounted Rubber Feet.
Side-Mounted Carrying Handle.
Front 1/8" thick steel standard-alignment 10-32 threaded Rack Rails.
Rear-mounted Quiet Exhaust Fan.
Exhaust Fan operates on included RFI Filtered AC Adapter,
can also be operated with any other 12VDC/300 Ma. DC source.
Overall Size: 20 1/2" width x 8 3/4" height x 18 1/2" depth.
Inside Depth: 16".
Weight: 20 Pounds.
Fan operates on 12VDC @ 300Ma.
With Mounting Hardware and AC Adapter for Fan.
This item is NEW in factory box.
This item is shipped via UPS Ground or USPS Parcel Post.
This item can only be shipped within the United States.
This item is NOT for sale outside the United States.
(Stock #: RACKCAB4U)
Click below for additional pictures:
2U Height Portable Electronic 19" Rack Cabinet.
2U Height Portable Electronic Rack Cabinet is perfect for
19" rack-mount
equipment such as radio tuners, transistorized amplifiers, equalizers,
mixers, signal processors, test equipment, or almost any other piece
of electronic equipment.
Carpet-Covered Rack Cabinet will protect the equipment while providing easy transport and a professional appearance. Also
attractive enough for permanent display on any shelf, table or
workbench.
Front of Rack Cabinet includes a removeable 2U height,
Black Powder-Coated Steel Panel.
Rear of Cabinet includes a 2U height, Black Powder-Coated Mesh Punched-Hole Steel Panel with Exhaust Fan.
Rear panel is easily machined to add cutouts for cables,
connectors, outlets, switches, or other needs.
Other Features include:
Fully Carpeted, 15mm Wood Cabinet.
Plastic Guards on all corners.
Bottom-mounted Rubber Feet.
Side-Mounted Carrying Handle.
Front 1/8" thick steel standard-alignment 10-32 threaded Rack Rails.
Rear-mounted Quiet Exhaust Fan.
Exhaust Fan operates on included RFI Filtered AC Adapter,
can also be operated with any other 12VDC/300 Ma. DC source.
Overall Size: 20 1/2" width x 5 1/2" height x 18 1/2" depth.
Inside Depth: 16".
Weight: 15 Pounds.
Fan operates on 12VDC @ 300Ma.
With Mounting Hardware and AC Adapter for Fan.
This item is NEW in factory box.
This item is shipped via UPS Ground or USPS Parcel Post.
This item can only be shipped within the United States.
This item is NOT for sale outside the United States.
(Stock #: RACKCAB2U)
Rack Cabinet Accessories
Click below for a larger picture:
Rack Panel with Exhaust Fan.
2U height, Black Powder-Coated, Mesh Punched-Hole,
Steel 19" Rack Panel.
Exhaust Fan operates on included RFI Filtered AC Adapter,
can also be operated with any other 12VDC/300 Ma. DC source.
Overall Size: 19" x 3 1/2" x 1".
With AC Adapter.
(Stock #: 2UMESHFAN)
Mesh Punched-Hole Steel 19" Rack Panel.
4U height, Black Powder-Coated, Mesh Punched-Hole,
Steel 19" Rack Panel.
6U Heavy-duty 1/8" thick Steel, Black Powder-Coated Rack Rails.
Standard rack hole alignment.
10-32 threaded front panel holes. 10 1/2 inches long.
Overall Size: 10 1/2" x 1 5/16" x 5/8".
These pre-cut Rack Rails make it easy to build a
custom rack cabinet.
Set of 2 Rails.
(Stock #: 6URAIL)
Rack Cabinet Accessories
Black Rack Screws.
Heavy-duty Pan-Head Rack Screws.
Standard rack 10-32 thread, 9/16" long.
With protective Nylon Washer. Black color.
Set of 8.
(Stock #: RACKSCREWS1)
Rack Cabinet Accessories
Recessed Cabinet Handle.
Heavy-Duty Recessed Cabinet Handle features a Spring-Loaded
Recessed 3/4" Rubber Coated Flip Handle.
All Steel construction with black powder coating.
With ten 3/16" diameter mounting holes.
Size: 6 5/16" x 4 3/16" x 3/8".
Mounts into a recessed 5" x 3" rectangular cutout.
Perfect for amplifier cabinets, speaker cabinets, and
portable rack cabinets.
(Stock #: FLIPHANDLE)
Rack Cabinet Accessories
Ribbed Plastic Cabinet Corner Protectors.
High Quality Ribbed Cabinet Corner Protectors are made of
ABS plastic. Ribbed construction permits interlocking when
stacking more than 1 cabinet.
With four 5/32" diameter mounting holes.
Size: 3 1/4" x 1 3/4" x 1 3/4".
Perfect for amplifier cabinets, speaker cabinets, and
portable rack cabinets.
Sloping Case has internal molded posts for a
5 1/4" x 6 1/2" PCB. Height of case slopes from
15/16" to 1 7/8". Size Approx: 5 7/8" L. x 7 5/8" W.
Beige color. With hardware.
Bopla Part Number: T898.
(Stock #: WNCABIN05)
Industrial Steel Keyboard Cabinet. (RFE)
Very well made heavy-gauge, steel cabinet was originally
made for industrial keyboards.
Top of cabinet has a lower middle 4" x 3/16" slot. Rear-left of cabinet
has a 4 11/16" x 3/4" cutout. Bottom of cabinet is ventilated and has a
removable panel secured with 8 screws and has 4 plastic feet mounted.
Cabinet is primed and ready for painting.
Size: 18 7/8" x 8 1/2".
Height slopes from 1 1/4" at rear to 7/8" at front.
Makes a perfect cabinet for many uses including Keyboard and Control Panel projects.
This Item is in Very Good condition.
Note: This Item is very heavy. If shipped outside
the United States we must charge the Actual Shipping Cost.
Please Email us before ordering.
(Stock #: KEYCAB)
Click below for an additional picture:
Wooden Roll-Top Cabinet.
Wooden Roll-Top Cabinet is very well made with All-Solid Wood-
(no veneer). Handmade in Thailand.
Was originally designed to hold 3 1/2" floppy discs but would make
an excellent cabinet for almost any project or circuit that needs a
high-class appearance.
Cabinet interior has two 9 1/8" x 3 3/4" x 4" compartments.
Overall Size: 8 7/8" x 10 7/8" x 5 5/8.
(Stock #: CAB10)
Plastic Base.
Ivory-color, heavy-duty plastic base contains
a 1/2" center hole and two 5/16" high, 1/16"
thick vertical risings.
Overall size: 5 5/16" x 4 15/16" x 1".
Perfect for a base for many projects.