6 Pin Male Header Connector.
9/32" long, 0.025" square pins.
0.100" pin spacing.
Can be snapped apart to make
a connector with less pins.
(Stock #: WNCONN50)
11 Pin Male Header Connector.
13/16" long, 0.025" square pins.
0.100" pin spacing.
Can be snapped apart to make
a connector with less pins.
(Stock #: WNCONN06)
8 Pin Male Header Connector.
(2 x 4) 7/32" long, 0.025" square pins.
0.100" pin spacing. Can be snapped
apart to make a connector with less pins.
(Stock #: MCONN21)
14 Pin Male Header Connector.
(2 x 7) 7/32" long, 0.025" square pins.
0.100" pin spacing. Can be snapped
apart to make a connector with less pins.
(Stock #: MCONN22)
18 Pin Male Header Connector.
(2 x 9) 7/32" long, 0.025" square pins.
0.100" pin spacing. Can be snapped
apart to make a connector with less pins.
(Stock #: MCONN18)
18 Pin Male Header Connector.
(3 x 6) 7/32" long, 0.025" square pins.
0.100" pin spacing. Can be snapped
apart to make a connector with less pins.
(Stock #: MCONN25)
26 Pin Male Header Connector.
(2 x 13) 9/32" long, 0.025" square pins.
0.100" pin spacing. Can be snapped
apart to make a connector with less pins.
(Stock #: MCONN16)
26 Pin Right-Angle Male Header Connector.
(2 x 13) 7/32" long, 0.025" square pins.
0.100" pin spacing. Can be snapped apart
to make a connector with less pins.
(Stock #: WNCONN13)
26 Pin Double-Width Male Header Connector.
(2 x 13) 7/32" long, 0.025" square pins.
0.100" x 0.200" pin spacing.
Can be snapped apart to make
a connector with less pins.
(Stock #: WNCONN17)
26 Pin IDC Male Header Cable Connector.
(2 x 13) 1/8" long, 0.025" square pins.
0.100" pin spacing. For use with
26-conductor ribbon cable.
(Stock #: WNCONN16)
50 Pin Male Header Connector.
(2 x 25) 3/8" long, 0.025" square pins.
0.100" pin spacing. Can be snapped
apart to make a connector with less pins.
(Stock #: MCONN23)
Data Sheet - PDF File size: 139K
XH Disconnectable Connector - 2 Contact Set.
These industry standard connectors are used on many
printed circuit boards for external interconnections.
Features folded-beam contacts, box-shaped shrouded
headers, and interchangeability with 2.5mm NR/NRD
and board-to-board JQ connectors.
Connectors are rated at 250VAC/250VDC at 3A.
Female crimp pins accept 22-28 AWG size wire.
Male connector is a right-angle entry PCB solder mount type.
2.5mm (0.100") pin spacing.
Set includes female connector housing, female crimp pins,
and male PCB solder mount connector.
Female connector body overall size: 7.3mm x 7.7mm x 5.5mm.
Male connector body overall size: 7.4mm x 11.5mm x 5.8mm.
Perfect for repair and replacement use or for new designs.
JST part numbers: XHP-2 / SXH-001T-P0.6 / S2B-XH-A.
(Stock #: MCONN37)
Data Sheet - PDF File size: 139K
XH Disconnectable Connector - 4 Contact Set.
These industry standard connectors are used on many
printed circuit boards for external interconnections.
Features folded-beam contacts, box-shaped shrouded
headers, and interchangeability with 2.5mm NR/NRD
and board-to-board JQ connectors.
Connectors are rated at 250VAC/250VDC at 3A.
Female crimp pins accept 22-28 AWG size wire.
Male connector is a right-angle entry PCB solder mount type.
2.5mm (0.100") pin spacing.
Set includes female connector housing, female crimp pins,
and male PCB solder mount connector.
Female connector body overall size: 12.3mm x 7.8mm x 5.6mm.
Male connector body overall size: 12.4mm x 11.4mm x 5.7mm.
Perfect for repair and replacement use or for new designs.
JST part numbers: XHP-4 / SXH-001T-P0.6 / S4B-XH-A.
(Stock #: MCONN38)
Data Sheet - PDF File size: 139K
XH Disconnectable Connector - 9 Contact Set.
These industry standard connectors are used on many
printed circuit boards for external interconnections.
Features folded-beam contacts, box-shaped shrouded
headers, and interchangeability with 2.5mm NR/NRD
and board-to-board JQ connectors.
Connectors are rated at 250VAC/250VDC at 3A.
Female crimp pins accept 22-28 AWG size wire.
Male connector is a right-angle entry PCB solder mount type.
2.5mm (0.100") pin spacing.
Set includes female connector housing, female crimp pins,
and male PCB solder mount connector.
Female connector body overall size: 24.8mm x 7.8mm x 5.6mm.
Male connector body overall size: 24.9mm x 11.5mm x 5.7mm.
Perfect for repair and replacement use or for new designs.
JST part numbers: XHP-9 / SXH-001T-P0.6 / S9B-XH-A.
(Stock #: MCONN39)
Data Sheet - PDF File size: 139K
XH Disconnectable 2 Contact Male Connector.
These industry standard connectors are used on many
printed circuit boards for external interconnections.
Features box-shaped shrouded header, and
interchangeability with 2.5mm NR/NRD
and board-to-board JQ connectors.
Connectors are rated at 250VAC/250VDC at 3A.
Male connector is a right-angle entry PCB solder mount type.
2.5mm (0.100") pin spacing.
Male connector body overall size: 7.4mm x 11.5mm x 5.8mm.
Perfect for repair and replacement use or for new designs.
JST part number: S2B-XH-A.
(Stock #: MCONN40)
Data Sheet - PDF File size: 139K
XH Disconnectable 4 Contact Male Connector.
These industry standard connectors are used on many
printed circuit boards for external interconnections.
Features box-shaped shrouded header, and
interchangeability with 2.5mm NR/NRD
and board-to-board JQ connectors.
Connectors are rated at 250VAC/250VDC at 3A.
Male connector is a right-angle entry PCB solder mount type.
2.5mm (0.100") pin spacing.
Male connector body overall size: 12.4mm x 11.4mm x 5.7mm.
Perfect for repair and replacement use or for new designs.
JST part number: S4B-XH-A.
(Stock #: MCONN41)
Data Sheet - PDF File size: 139K
XH Disconnectable 9 Contact Male Connector.
These industry standard connectors are used on many
printed circuit boards for external interconnections.
Features box-shaped shrouded header, and
interchangeability with 2.5mm NR/NRD
and board-to-board JQ connectors.
Connectors are rated at 250VAC/250VDC at 3A.
Male connector is a right-angle entry PCB solder mount type.
2.5mm (0.100") pin spacing.
Male connector body overall size: 24.9mm x 11.5mm x 5.7mm.
Perfect for repair and replacement use or for new designs.
JST part number: S9B-XH-A.
(Stock #: MCONN42)
125 VAC AC Outlet.
Rated at 15 Amps at 125 VAC.
Chassis-Mount with 6" wire leads.
Snap-mounts in to a 7/8" square hole.
UL Listed.
(Stock #: MCONN15)
IEC Male AC Outlet.
Rated at 10 Amps at 125/250 VAC.
PC or chassis mount with solder
terminals. UL listed.
(Stock #: MCONN17)
IEC Female AC Outlet.
Rated at 10 Amps at 125/250 VAC.
PC or chassis mount with solder
terminals. UL listed.
(Stock #: MCONN01)
2-Position Pushbutton Clip Terminal Board.
Size: 2" x 13/16" plastic plate with solder
terminal back and 2 mounting holes.
Perfect for speaker or low-power applications.
(Stock #: MCONN02)
4-Position Barrier Terminal Block.
High-temperature thermoplastic body construction.
6-40 screws. 3/8" spacing.
Rated at 120V at 5 Amps.
Size: 2 1/4" x 5/8" x 5/8". UL Listed.
(Stock #: MCONN36)
10-Position Barrier Terminal Block.
High-temperature thermoplastic body construction.
6-32 threaded bushings. 3/8" spacing.
Rated at 300V at 10 Amps.
Size: 5 5/8" x 7/8" x 3/4".
(Stock #: MCONN08)
Data Sheet - PDF File size: 69K
12-Position Barrier Terminal Block.
High-temperature thermoplastic body construction.
PC mount. Pass-through solder terminals. 4-40 screws.
5/16" screw spacing. Accepts 14-22 AWG size wire.
Size (less solder terminals): 4" x 9/16" x 1/2".
Rated at 120V at 15 Amps. UL Listed.
RDI part number: 4-PCV-12.
(Stock #: MCONN29)
20-Position Barrier Terminal Block.
Bakelite body construction. 6-32 screws.
3/8" spacing. Rated at 300V at 10 Amps.
Size: 8 3/16" x 7/8" x 3/8".
(Stock #: MCONN09)
20-Position Barrier Terminal Block.
Bakelite body construction. 6-32 screws.
7/16" spacing. Rated at 300V at 20 Amps.
Size: 9 1/2" x 1 1/8" x 7/16".
(Stock #: MCONN12)
24-Position Barrier Terminal Block.
Bakelite body construction. 6-32 screws.
3/8" spacing. Rated at 300V at 10 Amps.
Size: 9 11/16" x 7/8" x 7/16".
(Stock #: MCONN10)
25-Position Barrier Terminal Block.
Bakelite body construction. 3/8" spacing.
Rated at 300V at 10 Amps.
Size: 10 1/4" x 7/8" x 13/32".
(Stock #: MCONN11)
20-Position Barrier Terminal Block.
Bakelite body construction. 8-32 screws.
9/16" spacing. Rated at 300V at 30 Amps.
Size: 12 3/16" x 1 1/4" x 5/8".
(Stock #: MCONN14)
5-Pin Panel-Mount Standard DIN Jack.
Male pin contacts.
Ideal for MIDI use.
(Stock #: MCONN05)
5-Pin PC-Mount Standard DIN Jack.
Male pin contacts.
Ideal for MIDI use.
(Stock #: WNCONN02)
5-Pin PC-Mount Standard DIN Jack.
Female socket contacts.
Ideal for MIDI use.
(Stock #: WNCONN03)
5-Position Inline Standard DIN Male Plug.
Ideal for MIDI use.
(Stock #: WNCONN01)
5-Position Inline Standard DIN Female Jack.
Ideal for MIDI use.
(Stock #: WNCONN09)
7-Position Inline Standard DIN Female Jack.
(Stock #: CONN12)
6-Position Inline Mini DIN Female Jack.
PS2 computer keyboard/mouse type.
(Stock #: MCONN20)
Heavy-Duty 6 Conductor Male Molex Connector.
Crimp contacts rated at 250 V at 12 A.
Contacts accept wire sizes 10-14 AWG.
With male contacts.
(Stock #: CONN14)
Piggy-Back 1/4" Quick Disconnect Terminal.
1/4" male and female terminal.
Crimp/solder type.
Pack of 25 pieces.
(Stock #: MCONN03)
Data Sheet - PDF File size: 69K
Solder Terminal.
Forked feed-thru swage-mount type.
Mounts into a 0.096" hole (#41 drill).
Overall Size: 0.475" L. x 0.125" Dia.
Electro Solder finish.
Cambion part number: 140-1033-02-05-00.
Pack of 25 pieces.
(Stock #: MCONN04)
Solder Terminal.
Turret feed-thru swage-mount type.
Mounts into a 0.07" hole.
Overall Size: 0.330" L. x 0.094" Dia.
Pack of 25 pieces.
(Stock #: MCONN45)
Solder Terminal.
Turret feed-thru swage-mount type.
Mounts into a 0.09" hole.
Overall Size: 0.350" L. x 0.125" Dia.
Electro Solder finish.
Pack of 25 pieces.
(Stock #: MCONN43)
Solder Terminal.
Turret feed-thru swage-mount type.
Mounts into a 0.09" hole.
Overall Size: 0.375" L. x 0.125" Dia.
Electro Solder finish.
Pack of 25 pieces.
(Stock #: MCONN07)
Solder Terminal.
Turret feed-thru swage-mount type.
Mounts into a 0.110" hole.
Overall Size: 0.530" L. x 0.188" Dia.
Electro Solder finish.
Pack of 25 pieces.
(Stock #: MCONN44)
Connector Contact Pin.
MIL SPEC #: MS17807-16-16 contact pin used
in MIL-C-28748 rack and panel connectors.
Pack of 20 pieces.
(Stock #: MCONN13)
Alligator Clip.
1 1/16" long with solder connection.
Rated at 1A.
(Stock #: MCONN26)
Alligator Clip.
2" long with screw/solder connection.
Rear of clip accepts a standard banana plug.
Rated at 5A.
(Stock #: MCONN27)
Micro Alligator Clips.
1 5/16" long with solder connection.
Insulated barrel.
Set of 2: 1 red and 1 black.
(Stock #: MCONN28)
Insulated Alligator Clips.
2 1/2" long with screw/solder connection.
Insulated handle and barrel. Rated at 5A.
Set of 2: 1 red and 1 black.
(Stock #: MCONN34)
Fully Insulated Mini Alligator Clips.
1 3/8" long with solder connection.
Fully Insulated. Rated at 3A.
Set of 2: 1 red and 1 black.
(Stock #: MCONN31)
Fully Insulated Alligator Clips.
2" long with screw/solder connection.
Fully Insulated. Rated at 5A.
Set of 2: 1 red and 1 black.
(Stock #: MCONN32)
-Click Here To Return To Parts Index-
-Click Here To Return To Main Page-