Original Tektronix parts used in many models of oscilloscopes and other
pieces of test equipment. Unless otherwise indicated, all parts listed are
removed from equipment "(RFE)", tested, and are to be considered used.
494 Ohm 5% 25 Watts.
Tapped at 29 Ohms and 465 Ohms.
Tektronix part number: 308-0444-00.
(Stock #: TEKRES07)
Tektronix Potentiometer Assembly. (RFE)
Used in many oscilloscopes as a "Scale Illumination"
control. 25 Ohm wirewound with 22 Ohm load resistor.
With mounting hardware.
Tektronix part number: 311-0377-00.
(Stock #: TEKPOT01)
Tektronix 10-Turn Potentiometer. (RFE)
Used in many oscilloscopes as a "Delay Time
Multiplier" control. 30K Ohm Helipot.
With mounting hardware.
Tektronix part number: 311-0022-00.
(Stock #: TEKPOT02)
Tektronix Capacitor.
With mounting hardware.
Tektronix part number: 291-0040-00.
These Capacitors are NEW.
(Stock #: TEKCAP01)
Tektronix High Voltage Capacitor.
Ceramic 500 pf 20KV.
With mounting hardware.
Tektronix part number: 283-0096-00.
This Capacitor is NEW.
(Stock #: TEKCAP02)
Tektronix Original Transistors. (RFE)
All have Socket-Length cut leads.
Tektronix part number: 151-0063-01
Tektronix part number: 151-0096-00
Tektronix part number: 151-0103-00
Tektronix part number: 151-0108-00
Tektronix part number: 151-0121-00
Tektronix part number: 151-0127-00
Tektronix part number: 151-0269-00
Tektronix part number: 151-1009-00
Tektronix part number: 153-0548-00
Tektronix High Voltage Vacuum Tube Diode. (RFE)
Type 5642.
(Stock #: TEKVT01)
Tektronix Pushbutton Knob. (RFE)
Used in many oscilloscope Plug-In Vertical
Amplifier modules as "Invert" pushbutton knobs.
Size: 1/2" diameter x 9/32". Fits onto a 1/16"
shaft using a set screw.
(Stock #: TEKKNB03)
Tektronix Invert Knob. (RFE)
Used in many oscilloscopes as Vertical
Amplifier "Invert" pull knobs.
Size: 19/32" diameter x 9/16".
Fits onto a 1/8" shaft
using a set screw.
(Stock #: TEKKNB04)
Tektronix Red Knob. (RFE)
Red knob with white dot.
Size: 11/16" diameter x 7/16".
Fits onto a 1/8" shaft
using a set screw.
Tektronix part numbers: 336-0038-00 / 366-031.
(Stock #: TEKKNB05)
Tektronix Red Knob. (RFE)
Red knob with white dot.
Size: 3/4" diameter x 15/32".
Fits onto a 1/8" shaft
using a set screw.
(Stock #: TEKKNB06)
Tektronix Charcoal Knob. (RFE)
Charcoal knob with white line.
Size: 23/32" diameter x 23/32".
Fits onto a 1/4" shaft
using a set screw.
Tektronix part number: 336-0220-00.
(Stock #: TEKKNB07)
Tektronix Charcoal Knob. (RFE)
Charcoal knob with white dot.
Size: 3/4" diameter x 19/32".
Fits onto a 1/4" shaft
using a set screw.
(Stock #: TEKKNB08)
Tektronix Charcoal Knob. (RFE)
Charcoal knob with white line.
Size: 7/8" diameter x 3/4".
Fits onto a 1/4" shaft
using a set screw.
(Stock #: TEKKNB09)
Tektronix Charcoal Knob. (RFE)
Charcoal knob with white dot.
Size: 1 3/8" diameter x 21/32".
Fits onto a 1/4" shaft
using a set screw.
Tektronix part number: 336-0115-00.
(Stock #: TEKKNB10)
Tektronix Charcoal Concentric Knob. (RFE)
Charcoal concentric knob with white dot.
Size: 11/16" diameter x 17/32". With 1/8"
pass-through shaft hole. Fits onto a 1/8"
shaft using a set screw.
(Stock #: TEKKNB11)
Tektronix Charcoal Concentric Knob. (RFE)
Charcoal concentric knob with white line.
Size: 7/8" diameter x 3/4". With 1/4"
pass-through shaft hole. Fits onto a 1/4"
shaft using a set screw.
(Stock #: TEKKNB12)
Tektronix Charcoal Concentric Knob. (RFE)
Charcoal concentric knob with white dot.
Size: 1 3/8" diameter x 21/32". With 1/4"
pass-through shaft hole. Fits onto a 1/4"
shaft using a set screw.
(Stock #: TEKKNB13)
Tektronix Charcoal Concentric Knob. (RFE)
Charcoal concentric knob with white dot.
Size: 1 5/8" diameter x 21/32". With 1/4"
pass-through shaft hole. Fits onto a 1/4"
shaft using a set screw.
Tektronix part number: 336-0144-00.
(Stock #: TEKKNB14)
Tektronix Potentiometer Bushing. (RFE)
Used to mount 1/4" shaft screwdriver-adjust
potentiometers to a panel. With lockwasher.
(Stock #: TEKMECH02)
Tektronix Securing Rod. (RFE)
Used to secure Plug-In modules to
test equipment main frames.
With knob and retaining ring.
10 1/2" x 3/16". 10-24 thread.
Tektronix part numbers:
384-510
366-125
(Stock #: TEKMECH03)
Tektronix Model 547 Oscilloscope Manual.
Manual contains Operation, Calibration, and Service
information along with schematics and part lists.
(Stock #: TEK547MAN)
Tektronix Model CA Oscilloscope Plug-In Manual.
Manual contains Operation, Calibration, and Service
information along with schematics and part lists.
(Stock #: TEKCAMAN)
Tektronix P6131 10X Passive Oscilloscope Probe Manual.
Manual contains Operation, Calibration, and Service
information along with a part list.
(Stock #: TEKP6131MAN)
-Click Here To Return To Parts Index-
-Click Here To Return To Main Page-