Two Pound Parts and Accessories Grab Bag.
A 2 pound assorted selection of many of the items where
stock quantity is too limited to list on our Web Catalog.
All prime stock, NO used items or "junk". All items are
from the same categories that we list. Selection will
contain at least $100 of retail value.
Perfect for experimenters.
(Stock #: GRAB)
This Grab Bag can only be shipped within the United States.
This Grab Bag is NOT for sale outside the United States.
High Current USB AC Adapter/Charger.
Rated at 5 VDC/1000 Ma.
6 foot heavy-duty long cable with RFI filter
and Mini USB male plug.
Use with many MP3 players, GPS units, and other
items that charge through a Mini USB Port.
Thomson part number: SA1105-050100.
(Stock #: USBACAD01)
4 GB Micro USB Hard Drive Assembly.
Micro Hard Drive includes USB Interface PCB.
Size: 1 3/4" square x 1/4".
Seagate part number: ST1.
Note: USB connector is attached to a VERY THIN ribbon cable.
This Micro Drive needs to be placed into a supporting enclosure
that protects this ribbon cable.
This drive is tested before shipping. No Refunds will be
made because of customer damage to this USB connector.
If you break or damage the ribbon cable, you will fix it.
(Stock #: PARTMS10)
Stereo Cassette Playback/Record Head.
General purpose 2-channel replacement playback/record head.
Approx. Overall Size: 15/16" L. x 5/8" W. x 5/16" H.
(Stock #: PARTMS07)
Cassette Erase Head.
General purpose replacement erase head.
Approx. Overall Size: 3/4" L. x 1/2" W. x 3/8" H.
Data Sheet - PDF File size: 146K
Synchro Torque Receiver.
If you don't know what this item is,
then you probably don't need it.
It is typically used in aircraft to
send and receive signals from the
control surfaces. It is a "Big Buck" item.
Rotor specs: 400 Hz. 1 phase, 26 Volts.
Stator specs: 400 Hz. 3 phase, 11.8 Volts.
Clifton part number: TRH-11-E-4.
(Stock #: MS07)
Mallory 6 Volt Vibrator.
Used in some 1940's-1960's car radios,
military radios, and other products. 5 pins.
Size (less pins): 3" x 1 7/16" diameter.
Mallory part number: 1752.
(Stock #: VIBR01)
Child-Protection Safety AC Outlet Cover.
Plastic cover fits inside any 2 or 3 prong ac outlet.
Easily removable for an adult.
(Stock #: MS01)
Vinyl Insulators.
For use with miniature alligator clips up to 1 1/2" long.
Size: 1 7/8" long x 3/8" tapered diameter.
Set of 10 pieces: 5 black and 5 red.
(Stock #: PARTMS01)
Vinyl Insulator.
For use with miniature alligator clips up to 1.7" long.
Size: 1.81" long x 0.37" tapered diameter. Blue color.
Mueller part number: BU-72-6.
(Stock #: PARTMS02)
Vinyl Insulator.
For use with miniature alligator clips up to 1.7" long.
Size: 1.81" long x 0.37" tapered diameter. Green color.
Mueller part number: BU-72-5.
(Stock #: PARTMS03)
Vinyl Insulator.
For use with miniature alligator clips up to 1.7" long.
Size: 1.81" long x 0.37" tapered diameter. Yellow color.
Mueller part number: BU-72-4.
(Stock #: PARTMS04)
Vinyl Insulator.
For use with crocodile clips up to 1.5" long x 0.40" diameter.
Size: 1.71" long x 0.56" tapered diameter. Red color.
Mueller part number: BU-87-2.
(Stock #: PARTMS05)
Vinyl Insulator.
For use with small automotive battery clip
handles up to 2" long x 1/2" diameter.
Size: 3 5/8" long x 9/16" tapered diameter. Black color.
Mueller part number: BU-90-0.
(Stock #: PARTMS06)
-Click Here To Return To Parts Index-
-Click Here To Return To Main Page-